Skip to content
DTE

Reserved Technical Equipment (VTZ)

Our company provides comprehensive professional inspections and tests (revisions) of dedicated technical equipment (VTZ) for businesses, sole traders and their premises across Slovakia — gas, pressure, lifting and electrical — on the basis of issued certificates and authorisations. Everything is handled in accordance with applicable legislation, so your equipment stays safe and operational, your premises pass inspections and you avoid penalties.

5,044 recenziíGoogle
Reserved Technical Equipment (VTZ)

Interested in this service?

Leave us your contact and we will get back to you with pricing and dates, usually within 24 hours.

Why handle VTZ with an expert

Reserved technical equipment (VTZ) is among the most demanding areas of occupational safety, both technically and legally. Decree No. 508/2009 Coll. defines it as pressure, lifting, electrical and gas equipment, which — according to the degree of risk — is divided into group A (high degree of risk), group B (higher degree of risk) or group C (lower degree of risk) — whereby equipment of group A and group B is regarded as reserved technical equipment (§ 4 ods. 2 of Decree No. 508/2009 Coll.). If your company operates a boiler, a compressor air receiver, a lift, a crane, a gas boiler room or an electrical installation, you have legal obligations that cannot be postponed. Responsibility for the safe operation of this equipment lies directly with the employer. Act No. 124/2006 Coll. on BOZP places on the employer the duty to monitor the safety condition of technical equipment and, at intervals laid down by special regulations, to arrange official tests, professional inspections and professional tests of reserved technical equipment (§ 9 of Act No. 124/2006 Coll.). It is therefore not a voluntary activity or a paper formality, but a legal obligation whose non-fulfilment has real consequences.

The risks of neglect are twofold. The first is safety-related: an uninspected pressure unit can burst, a neglected electrical installation can cause a fire and a faulty lift a serious injury. The second is legal and financial — during an inspection the labour inspectorate checks whether you have valid inspection reports, kept records of the equipment and rectified any deficiencies found. For a breach of obligations in the field of BOZP, the labour inspectorate may impose on the employer a fine of up to €100,000 (§ 19 ods. 1 písm. a) of Act No. 125/2006 Coll.). To this is added the risk of the insurance benefit being reduced or refused, since insurers routinely request valid inspection reports in the event of a claim. Yet most companies do not have the internal capacity to handle this agenda correctly. An inspection of VTZ may be carried out only by an inspection technician holding a valid certificate for exactly the given type and group of equipment — a certificate for pressure equipment is not valid for gas equipment and vice versa. Tracking dozens of different deadlines, keeping documentation in line with the law and coordinating technicians with different authorisations is administratively demanding and error-prone. This is exactly where we step in — we take over the entire VTZ agenda, from the initial audit through carrying out the inspections to keeping watch over the next deadlines. You will find an explanatory overview of the deadlines and obligations in our guide to reserved technical equipment; this page covers what we will do for you.

What we arrange for you

Our service is designed so that you don't have to worry about reserved technical equipment. We take over the complete agenda and deliver the result — valid inspection reports and order in the documentation. Specifically, we arrange for you:

  • Professional inspections and tests (OPaOS) of all four types of VTZ through inspection technicians holding valid certificates for the relevant type and group of equipment. A professional inspection and test checks the safety condition of the equipment after manufacture, assembly, installation, reconstruction and repair, as well as during operation (§ 13 ods. 1 of Decree No. 508/2009 Coll.).
  • An initial audit and inventory of the equipment — we map which VTZ you operate, which group they belong to and what state your documentation is in.
  • Keeping the accompanying and record-keeping documentation under § 8 of Decree No. 508/2009 Coll., including records of VTZ and the records of inspections, checks and tests carried out.
  • Monitoring and notification of deadlines — each item of equipment has its own inspection interval; we track them systematically and alert you in good time.
  • Coordination of inspection technicians for all 4 groups of VTZ — instead of several suppliers you have a single point of contact.
  • Resolving deficiencies found, including alerting you to the need for a shutdown in the case of a fault posing an immediate threat to life and health.
  • Inspections after assembly and reconstruction — the initial inspection, and an official test where the law requires it. An official test is carried out before commissioning on VTZ of group A and on selected gas equipment (§ 12 ods. 1 of Decree No. 508/2009 Coll.).

We provide this agenda on a one-off basis (for example when you need to put overdue inspections in order) or in the form of ongoing contractual care, where we take care of everything long-term and you simply receive completed inspection reports and notifications. With contractual care, a major advantage is that we can link VTZ with the other areas of safety — BOZP, fire protection and the occupational health service — under a single supplier.

The four groups of VTZ we cover

We cover all four types of reserved technical equipment under Decree No. 508/2009 Coll. So you don't have to deal with several suppliers — we take care of your entire equipment portfolio at once. A detailed explanation of the classification into groups and the tables of deadlines can be found in the VTZ guide; here we give the deadlines only in broad terms.

Pressure equipment

Steam and liquid boilers, stationary pressure vessels, compressor air receivers, expansion tanks in boiler rooms, autoclaves and pipelines carrying steam or hot water. We arrange external and internal inspections as well as pressure tests, and for group A equipment we coordinate the official and repeat official tests carried out by an authorised legal entity. The deadlines are laid down in Annex No. 5 to Decree No. 508/2009 Coll.

Lifting equipment

Cranes, lifts, forklift trucks, mobile elevating work platforms, tail lifts, racking stacker cranes and crane runways. For lifting equipment we arrange both professional inspections and professional tests under Annex No. 7 to Decree No. 508/2009 Coll. — for group A cranes on a permanent crane runway (overhead, gantry, as well as mobile, construction or cable cranes) the interval under note 4 of Annex 7 is a professional inspection every year and a professional test every 2 years; the base interval of 2 years / 4 years applies only to a crane without a permanent runway, while a repeat official test is generally carried out every 10 years.

Electrical equipment

Electrical installations, switchboards, lightning conductors, equipment for protection against static electricity and electrical machines. The intervals of professional inspections and professional tests of electrical equipment during operation are laid down in Annex No. 8 to Decree No. 508/2009 Coll. and depend on the type of building and the classification of external influences. We arrange initial, periodic and extraordinary inspections as well as inspections after reconstruction.

Gas equipment

Gas boiler rooms, gas regulating stations, gas appliances, industrial gas pipelines and gas distribution networks. The deadlines are laid down in Annex No. 10 to Decree No. 508/2009 Coll. — for example, for gas appliances with an output from 5 kW to 0.5 MW (group B) a professional inspection is carried out every year and a professional test every 3 years, while for gas distribution pipelines the inspection interval is 3 years and the test interval 6 years.

Example of equipmentIndicative interval (inspection / test)
Stationary pressure vessel (gr. A)external 1 year / internal 5 years / pressure 10 years
Gas appliance 5 kW – 0.5 MWinspection 1 year / test 3 years
Building electrical installationinspection 5 years (shorter depending on the environment)
Lightning conductor2 years (level I – II) / 4 years (III – IV)
Crane on a permanent runway (gr. A)inspection 1 year / test 2 years
Lift carrying personsinspection 3 months / test 3 years

The deadlines are indicative — for a specific item of equipment they may differ according to the group, the environment and the manufacturer's instructions. We will draw up the exact schedule for your equipment during the initial audit; the complete tables according to the annexes to the decree can be found in the VTZ guide.

A key rule applies to every group: an inspection may be carried out only by an inspection technician with a certificate for exactly the given type and group of equipment, otherwise the inspection finding is invalid. We guarantee that we deploy a technician with the correct authorisation on each of your items of equipment.

Get a price quotation

How the cooperation works

We have set up the cooperation to be as simple as possible for you. The whole process is led by a single coordinator on our side, who is your point of contact from the first phone call to the delivery of the inspection reports. In practice it runs in seven steps:

  1. Non-binding contact and consultation. You call or write to us and we go through the basic information — what equipment you operate, where you are based and what state your documentation is in. Even during this conversation you get a first rough idea of the scope and price. The first consultation is always free and non-binding.

  2. Initial audit and equipment inventory. We visit your premises or request the documents electronically and map all your reserved technical equipment. We determine which group it belongs to, when the last inspection took place, which reports are missing and where the risks lie. The result is a clear overview — you know exactly what you have and what needs to be put in order.

  3. Schedule of deadlines and price quotation. Based on the audit we prepare a schedule of inspections with all the dates a year ahead and a non-binding, tailor-made price quotation. The price for inspections is normally set by agreement according to the type and number of items of equipment — with no hidden charges, and you always know what you are paying for.

  4. Carrying out professional inspections and tests. On the agreed dates we carry out professional inspections and tests of your equipment through inspection technicians holding valid certificates. We plan the work so that it interferes with your operation as little as possible — where feasible, we synchronise inspections with planned shutdowns. After each inspection you receive an inspection report with a clear verdict on the equipment's fitness.

  5. Keeping and updating documentation. We keep all inspection reports, protocols and equipment records under § 8 of Decree No. 508/2009 Coll. orderly and up to date. During a labour inspectorate check you then have everything readily available in physical or electronic form, according to your preference.

  6. Monitoring deadlines and notifications. This is the heart of our contractual care. We monitor all the deadlines for you and alert you well in advance that the next inspection is approaching. We arrange the date, the technician and any shutdown — all you have to do is approve it. That way you never miss a statutory deadline.

  7. Resolving deficiencies and support during inspection. If an inspection reveals a fault, we propose corrective measures and help to implement them. In the case of a fault posing an immediate threat to life and health, we point out the need to take the equipment out of operation immediately. And when the inspector arrives, we are your expert partner who can explain and defend the documentation.

Thanks to this process, the chaotic last-minute chasing of inspections turns into a predictable, managed system. That is the difference between a company that fears inspections and a company that is always ready for them.

Who is the VTZ service for?

Reserved technical equipment concerns a wider range of companies than many people think — practically every entity that operates a building with an electrical installation, heating or a lift has it. Our service is suitable for a wide range of segments:

Manufacturing and industrial enterprises

Engineering plants, metalworking, food processing, plastics manufacturing and chemical production usually have the most varied portfolio of VTZ — pressure vessels, compressors, steam boilers, overhead and gantry cranes, extensive electrical installations and industrial gas pipelines. Here the monitoring of deadlines is especially critical, because there are dozens of items of equipment and each has its own interval.

Warehouses and logistics centres

In warehouses, lifting equipment predominates — forklift trucks, racking stacker cranes, tail lifts and sometimes overhead cranes. Added to this is an extensive electrical installation, lighting and often gas heating of the hall. We arrange the inspection of everything at once, so that your logistics run without interruption and without legal risk.

Office buildings and offices

Even an ordinary office has reserved technical equipment: an electrical installation, switchboards, a lightning conductor, often a lift and gas or electric heating. Many administrative entities are not aware that inspection obligations apply to them too — and it is precisely they who tend to be unpleasantly surprised during an inspection.

Operations with boilers, lifts and compressors

Hotels, guesthouses, restaurants, healthcare facilities, car repair shops, filling stations and managed residential buildings — wherever there is a gas boiler room, a passenger or goods lift, a compressor air receiver or a pressure vessel, specific inspection obligations arise. These operations often combine several types of VTZ and appreciate a single supplier instead of three.

Construction companies

Construction cranes, mobile elevating work platforms, temporary electrical installations on construction sites and pressure and gas equipment. The construction environment has stricter and shorter intervals for some equipment (for example temporary electrical installations on construction sites with an interval of 0.5 years), which is why systematic monitoring of deadlines is extremely important.

Whether you have one item of equipment or a hundred, we adapt the scope of the service to your situation. For small operations we offer a simple one-off solution; for larger companies, comprehensive contractual care with regular reporting. And since we operate throughout Slovakia, it doesn't matter where you are based.

Why VTZ from Alpha Safety

There are many independent inspection technicians and smaller firms on the market. What sets us apart and why entrust VTZ to us?

  • Comprehensiveness — BOZP, OPP, PZS and VTZ under one roof. We are not just an inspection company. VTZ is closely linked with the other areas of safety — inspections are part of the monitoring activity within BOZP, and a missing inspection is at the same time a deficiency during a labour inspection.
  • A single supplier for your company's entire safety agenda — instead of a safety technician, a fire protection technician, a PZS doctor and three inspection technicians, you have one contact and one contract.
  • Inspection technicians with authorisations for all four types of VTZ — we always deploy a technician with the correct authorisation for the specific type and group of equipment, so your inspection finding is always valid.
  • Coverage throughout Slovakia — we are based in Martin, but we provide services in all regions of the SR, so we can serve companies with several premises in a uniform way.
  • Availability and a fast response — when you need an inspection quickly (before final building approval, before a check or after putting new equipment into operation), we can step in without unnecessary waiting.
  • An individual approach and fair prices — we base the price quotation on the real scope of your equipment after the initial audit, with no hidden charges.

Behind us stand dozens of companies served across industries — from manufacturing through logistics to administration. In line with our company policy, authorship and professional guarantees are presented on behalf of the organisation Alpha Safety s.r.o. as a whole — we stand behind the quality of our services as a company.

Obligations and sanctions in brief

As an operator, you are obliged to arrange professional inspections and professional tests of VTZ within the statutory deadlines, to keep records of the equipment and retain inspection reports for the control authorities, to operate the equipment only through professionally competent persons, and to rectify deficiencies found (§ 8 of Decree No. 508/2009 Coll. and § 9 of Act No. 124/2006 Coll.). In the common parts of residential buildings, these obligations are fulfilled by the administrator or the owners' association. For a breach of obligations in the field of BOZP, the labour inspectorate may impose on the employer a fine of up to €100,000 (§ 19 ods. 1 písm. a) of Act No. 125/2006 Coll.). If an occupational accident has occurred as a result of the breach, the law sets minimum fines — at least €20,000 in the case of serious damage to health and at least €33,000 in the case of death. A detailed analysis of the obligations, deadlines and professional competence can be found in the VTZ guide. We will help you fulfil all these obligations without stress — and stand by your side during an inspection.

Get a non-binding quotation

Don't leave VTZ inspections to the last minute — the risk of a fine, an accident and a reduction of the insurance benefit is too high. Entrust reserved technical equipment to experts: we will map your equipment, prepare a schedule, carry out the inspections and watch over all the further deadlines. The first consultation is always free and entirely non-binding — we will prepare a tailor-made price quotation for your company anywhere in Slovakia.

Non-binding consultation

Our professional services in the field of VTZ include:

Electrical equipment

Revisions and professional inspections of electrical equipment and electrical installations.

Gas equipment

Inspections and revisions of gas appliances and distribution systems.

Pressure equipment

Professional inspections and tests of pressure vessels and equipment.

Lifting equipment

Revisions of cranes, hoists, elevators and motor trucks.

VTZ record keeping

Keeping records of reserved technical equipment.

Operating regulations

Preparation of operating regulations and directives for safe equipment operation.

Schedule

Preparation of a schedule for professional tests and inspections.

Technical checks

Technical checks of equipment including motor trucks.

Documentation

Preparation of accompanying technical documentation.

Condition assessment

General assessment of the technical condition of individual equipment.

Consulting

Professional consulting in the field of operation, inspection and maintenance of VTZ.

What will our service bring you?

  • Expert representation during inspections
  • Professional documentation management
  • Ensuring compliance with legislation
  • Reduced risk of technical failures
  • Safe condition of technical equipment
Get a free consultation

Súvisiace články

Stručná odpoveď

Inspections of reserved technical equipment (VTZ) are professional inspections and tests of pressure, lifting, electrical and gas equipment, which verify their safety and operability under Decree No. 508/2009 Coll. Alpha Safety provides inspections of all four types of VTZ, including keeping records, the test schedule, accompanying documentation and an assessment of the technical condition of the equipment.

Časté otázky – DTE

The price for inspections is standardly set by agreement according to the type, number and group of the reserved technical equipment. A single pressure vessel costs differently than a complete production hall with dozens of items of equipment. That is why we first carry out a no-obligation initial audit and only then prepare an exact tailored quote, with no hidden charges. The first consultation is free.

Yes. We cover all four types of VTZ under Decree No. 508/2009 Coll. – pressure, lifting, electrical and gas. We coordinate inspection technicians with valid certificates for each type and group of equipment, so you do not have to look for several providers. You handle everything in one place, under one contract.

The periods vary according to the type and group of equipment and are set out in Annexes No. 5 to 10 of Decree No. 508/2009 Coll. For example, a gas appliance with an output from 5 kW to 0.5 MW requires a professional inspection every year. We will determine the exact intervals for your specific equipment during the initial audit and then keep track of them for you.

You are not alone – missing or incomplete documentation is a very common situation. During the initial audit we map what you have and what is missing, and we help to supplement or restore the documentation. If documents are lost, you can turn to the manufacturer or supplier for duplicates. We will set up orderly records for you, which we will then keep up to date.

Yes. We are based in Martin, but we provide inspections and the entire VTZ agenda across Slovakia – in all regional and district towns. We can also serve companies with multiple operations in different locations in a unified way, under one contract and with a single point of contact.

Yes, it is one of the main advantages of our contractual care. We systematically keep track of all your equipment's deadlines and alert you well in advance when the next inspection is approaching. We arrange the date, the technician and any shutdown – all you have to do is approve it. You will therefore never miss a statutory deadline.

It depends on the type of equipment and the phase – for most VTZ, professional inspections (more frequent, visual and functional checks) and professional tests (less frequent, including measurements and a pressure test) alternate during operation, and for group A equipment an official test is added. We will assess for you which procedures your specific equipment needs and at what intervals, and we will draw up the whole schedule so that you neither miss anything nor pay for superfluous procedures. You can find an explanation of the terms in the VTZ guide.

There are three types of risk. Safety – a malfunction, fire, explosion or injury. Legal – at an inspection the labour inspectorate may impose a fine of up to EUR 100,000 under § 19 ods. 1 písm. a) of Act No. 125/2006 Coll.; if an occupational accident arises as a result of the breach, the minimum fine is at least EUR 20,000 for serious harm to health and at least EUR 33,000 for a death. And financial – in the event of a loss, the insurer may reduce or refuse the insurance payout.

We respond to routine enquiries promptly and are available for urgent situations too. When you need an inspection quickly – before final building approval, before an inspection or after putting new equipment into operation – we can start without unnecessary waiting. We agree the specific date at the very first contact.

Yes. When new or reconstructed equipment is put into operation, we provide an initial inspection. For reserved technical equipment in group A and selected gas equipment, an official test is also required before being put into operation under § 12 ods. 1 of Decree No. 508/2009 Coll. – we will coordinate its performance by an authorised legal entity for you as well.

Yes, and it is crucial. An inspection may be carried out only by an inspection technician with a valid certificate for precisely the given type and group of equipment. If an inspection is carried out by someone without the correct authorisation, the finding is invalid – as if the inspection had not taken place at all. We guarantee that for each of your items of equipment we deploy a technician with the correct authorisation.

Yes, and that is precisely our strength. Alpha Safety provides work safety (BOZP), fire protection, the occupational health service, training and VTZ inspections under one roof. Instead of several providers, you have one contact for your company's entire safety – which saves time, costs and administration and ensures that the individual areas connect with one another.

We will not leave you to deal with it. We propose corrective measures, explain their seriousness and help with a remediation plan. If it is a defect with an immediate threat to life and health, the inspection technician will propose taking the equipment out of operation immediately until it is repaired. Once the shortcomings are remedied, we arrange a check of whether the equipment is fit again.

Yes. Even an office or small operation usually has an electrical installation, a switchboard, a lightning conductor, often a lift or gas heating – and inspection obligations apply to all of these. The size of the company is irrelevant; the obligations arise from what equipment you operate. We will adapt the scope of the service even to the smallest operations.

Very simply. Get in touch and we will arrange a no-obligation consultation and an initial audit, at which we map your equipment and documentation. You will then receive an inspection schedule and a tailored quote. The first consultation is always free and commits you to nothing.

Write to us — we'll get back to you within one business day

Leave us your contact details and we'll get back to you — no commitment.

Free consultation

Need VTZ revisions?

Contact us for a free consultation. We'll propose a solution tailored to your needs.

5,044 recenziíGoogle
10+
Years of experience
in OHS, FP, and occupational health services
500+
Satisfied clients
throughout Slovakia
24/7
Availability
for urgent situations
100%
Satisfaction
service quality guarantee